Hunter Marine Family User Manual page 105

POWER SOURCE: TO OPERATE:
D.C. MAIN TURN BATTERY SWITCH (LOCATED AT ENGINE BOX) TO THE "ON" POSITION, THEN TURN
ON "D.C. MAIN" BREAKERLOCATED ON BATTERY SWITCH PANEL.
IF NO POWER: CHECK BATTERY CONNECTIONS.
1. CONNECT SHORE POWER CABLE TO SUPPLY POWER TO A.C. POWER MAIN DISTRIBUTION PANEL
2. TURN ON SHORE POWER BREAKER ON LOCATED STRBD Q-BERTH.
SHORE POWER 3. A.C. POWER MAIN DISTRIBUTION PANEL SHOULD NOW BE OPERABLE
IF NO POWER TO PANEL, CHECK THE BREAKER AT THE DOCKSIDE POWER SUPPLY BOX.
OPT. BATT. CHARGER 1. CONNECT SHORE POWER CABLE AND TURN ON "SHORE POWER " BREAKER
2. TURN "BATTERY CHARGER" BREAKER TO THE "ON" POSITION
H27 POWER SYSTEMS OPERATION PROCEDURES
58A-1