Table of Contents
Advertisement
18 electrolux
Problem
The display shows an error
code that is not in this list
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
Warning! Refer to "Safety information"
chapter.
The handle can be replaced to match
the décor of your kitchen. The change
must be done by an authorized person.
Use only genuine replacement parts.
ELECTRICAL CONNECTION WITH THE
HOB
You can connect the oven with an inde-
pendent hob from the current range of
Electrolux and AEG hobs . You can buy the
necessary connection cable separately:
• AK - EB/GKTC (S) 1 m for ceramic hobs.
• AK - EB/GKTCi (S) 1 m for induction
hobs.
The hob connection socket is at the top of
the oven cabinet.
INSTALLING THE OVEN
Warning! Installation into flammable
material must agree with NIN 2005,
Possible cause
There is an electronic error
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
A
A
A = appliance
N = recess
1. Pull the appliance drawer out as far as
• Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and
activate it again
• If the display shows the error
code again, refer to the Serv-
ice Center
.........................................
.........................................
.........................................
chapter 4.2.2 of the VKF (Swiss
Association of the Cantonal Fire
Insurance Companies) fire protection
guidelines and regulations.
A
A
D
A 548
N 550
it goes and remove it.
Solution
ca.50
A
435
Advertisement
Table of Contents
