Electrolux EBGL6X User Manual page 16

16 electrolux
At the end of the oven function, the heated
odour filter continues to operate for next 10
minutes. odour filter stops, if you deactivate
the appliance or open the oven door.
For pyrolytic cleaning odour filter works au-
tomatically for first 15 minutes if the oven
temperature is lower then 400°C.
SHELF SUPPORT
You can remove the shelf support to clean
the side walls.
Removing the shelf support
1. Pull the front of the shelf support away
from the side wall.
2. Pull the shelf support from the back of
the side wall to remove it.
1
To install the shelf support follow the
procedure in reverse.
Important! Valid with telescopic
runners:
The retaining pins on the telescopic shelf
runners must point to the front!
OVEN LAMP
Warning! There is a risk of electrical
shock.
The oven lamp and the lamp glass cov-
er can be hot.
2
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
Caution! Put a cloth on the bottom of
the interior of the appliance. It prevents
damage to the lamp glass cover and
the cavity.
Replacing the oven lamp:
1. You can find the lamp glass cover at
the cavity ceiling.
Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3. If necessary, replace the oven lamp
with applicable 300°C heat-resistant
oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
Replacing the oven lamp:
1. You can find the lamp glass cover at
the left side of the cavity.
Remove the left shelf rail.
2. Use a narrow, blunt object (for example
a teaspoon) to remove the glass cover.
Clean the glass cover.
3. If necessary, replace the oven lamp
with applicable 300°C heat-resistant
oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
5. Install the left shelf rail.
CLEANING THE DOOR
To clean the appliance door, remove it.