Care And Cleaning - Electrolux EBGL6X User Manual

Oven temperature
250 °C -maximum °C
After an automatic switch-off, touch a sen-
sor field to operate the appliance again.
Important! The Automatic switch-off works
with all oven functions, apart from Light,
Low temperature cooking, core
temperature sensor, Duration, End, Time
delay.
BRIGHTNESS OF THE DISPLAY
There are two modes of display's
brightness:
• Night brightness - when the appliance is
off, the brightness of the display is lower
between 22:00 and 06:00;
• Day brightness:
– when the appliance is on;

CARE AND CLEANING

Warning! Refer to "Safety information"
chapter.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and cleaning
agent.
• To clean metal surfaces use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories (with a soft cloth
with warm water and cleaning agent) af-
ter each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can cause a damage to the nonstick
coating.
CATALYTIC CLEANING
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
walls while the appliance operates.
Switch-off time
3.0 h.
– if you touch any of the sensor fields
during night brightness (apart from ON/
OFF), the display goes back to day
brightness mode for next 10 seconds;
– if the appliance is off and you set the
minute minder. When the minute mind-
er function ends, the display goes back
to night brightness;
COOLING FAN
When the appliance operates, the cooling
fan activates automatically to keep the sur-
faces of the appliance cool. If you deacti-
vate the appliance, the cooling fan can con-
tinue to operate until the appliance cools
down.
To support this self-cleaning process heat
the appliance without any food regularly:
1. Remove accessories from the appli-
ance.
2. Set the Catalytic cleaning function (refer
to "Oven functions").
The display shows "Cata" and duration
of the cleaning process (1 hour). The
duration is fixed but you can use End
function to delay start of cleaning proc-
ess.
3. An acoustic signal operates after the
time ends. The appliance deactivates.
4. Touch any sensor field or open the
oven door to stop the signal.
5. Wipe bottom of the appliance with a
soft and damp sponge.
Discolouration of the catalytic surface
has no effect on catalytic properties.
During catalytic cleaning the oven light
is on.
ODOUR FILTER
Odour filter is on:
• with every oven function;
• if the temperature in the appliance is
more then 50°C;
When the odour filter is on, the display
shows odour filter symbol
electrolux 15
.