Table of Contents
Advertisement
12 electrolux
• The core temperature: refer to the table
for the core temperature sensor in the
"Recipe book".
Important! Only use the core temperature
sensor supplied or original replacement
parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows a flashing symbol
and the default set core tempera-
ture. The temperature is 60 °C during
the first use, and the last set value dur-
ing each subsequent use.
4. Touch
or
perature.
5. Touch
or the settings save auto-
matically after 5 seconds.
You can set the core temperature only
when the symbol
display shows a static symbol
fore you set the core temperature, use
and
or
on the
to set the core tem-
flashes. If the
be-
to set a new value.
6. Set the oven function and, if necessary,
the oven temperature.
The display shows the current core
temperature and
relation between the set oven tempera-
ture and the current oven temperature).
The core temperature sensor must stay
in the meat and in the socket during
the cooking.
While the appliance calculates the ap-
proximate duration time, the value of
the Count Up Timer function shows in
the Timer/Residual heat display. When
the first calculation ends, an acoustic
signal sounds, the Timer/Residual heat
display shows —:— and then the ap-
proximate duration of the cooking.
The appliance continues to calculate
the duration during the cooking. The
display updates at intervals with the
new duration value.
7. When the meat is at the set core tem-
perature, the core temperature and
flash. An acoustic signal sounds for two
minutes.
Touch a sensor field to deactivate the
acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
Warning! Be careful when you remove
the core temperature sensor. It is hot.
There is a risk of burns.
9. Deactivate the appliance.
When you put the core temperature
sensor into the socket, you cancel the
settings for the clock functions.
(which shows the
Advertisement
Table of Contents
