What To Do If - Electrolux EOC65140 User Manual

54 electrolux what to do if ...

What to do if ...

Problem
The oven does not heat up
The oven lighting is not oper-
ating
Pyroluxe is not working ("C1"
appears in the display)
F2 appears in the clock dis-
play
In the clock display there ap-
pears a fault code that is not
listed above
Possible cause
The oven is not switched on
The clock has not been set
The required settings have not
been set
The oven's safety cut-out has
been tripped
The fuse in the house's electri-
cal wiring (fuse box) has been
tripped
The oven bulb is faulty
Side rails/oven shelf runners
have not been removed
Door not properly closed or
door lock defective
Fault in the electronics
Remedy
Switch the oven on
Set the current time on the
clock
Check the settings
See "Safety cut-out"
Check fuse. If the fuses trip re-
peatedly, please call an author-
ised electrician
Change the oven bulb
Remove side rails/oven shelf
runners
Close door properly;
Turn the appliance off and on
again via the house fuse or the
safety switch in the fuse box;
If displayed again, please con-
tact the Customer Care De-
partment
Switch off the appliance via the
house fuse or the safety switch
in the fuse box and switch it on
again.
If displayed again, please con-
tact your local Service Force
Centre.