Table of Contents
Advertisement
Fitting the oven door
1 Make sure that the hinge unit is in its
parking position.
2 Insert the hinge unit in the slot on the
door. Press down until the assembly
spring clicks into position.
3 Close the oven door.
The oven door glass
Do not use the oven door as
a foot-hold.
The oven door is made up of two parts with
heat reflecting glass to give a lower surface
temperature. The inner glass panes can be
removed for cleaning.
CLEANING BETWEEN THE GLASS PANES
Take care that you do not damage the
door glass. Formation of cracks at
the edges could cause it to break after
being heated a few times.
REMOVING THE UPPER GLASS PANE IN THE OVEN DOOR
1 Grasp the upper glass pane at its
lower edge and push it against spring
pressure towards the oven door
handle, until it is free at the bottom
(1).
2 Lift up the pane slightly at the bottom
and pull it out (2).
54
Advertisement
Table of Contents
