Table of Contents
Advertisement
The Automax function
This cooker is fitted with a special automatic
heating system called Automax.
The function is engaged each time you
wish to use it. It works like this:
You select the setting for the heat that you
consider suitable for cooking/roasting. The
heating zone starts at the highest heat setting
and goes over automatically to the selected
setting after a certain time.
Cooking/roasting with Automax
This is how you activate the function.
NOTE! This must be done each time you
wish to use the automatic system.
1 Set the function A
in the display.
2 Then make the desired setting for
cooking/roasting. It takes about
5 seconds before
indication area.
The heater zone display shows
implies that the heating zone operates at
maximum heat for a certain time, depending
on the heating setting selected. See the
diagram.
When the time has expired, there is
automatic switch-over to the set value and the
A
letter
is no longer shown.
If the setting is changed during heating
with A
this function disappears and
UTOMAX
re-setting must be carried out.
In general it can be said that settings 2–5
are suitable for cooking and settings 6–8 for
roasting. For heat retention, setting 1 is
suitable. But, as usual, you must experiment
to find the setting and heating zone that is
best for you and your pots and pans.
A
,
appears
UTOMAX
A
lights up in the
A
. This
25
Advertisement
Table of Contents
