Table of Contents
Advertisement
Selection of heat retention
All four cooking zones are fitted with a heat
retention setting
.
Use area
to set the heat retention
position
.
Choose Stop+Go
The Stop+Go function switches all the
connected cooking zones to heat retention
setting at the same time and then back to the
earlier heating setting. This function is
suitable for a short interruption before
continuing with cooking, for example to
answer the telephone.
Press
and the heat retention position
is shown.
To switch off the function, press
and the
earlier heating setting is shown in the
display.
Booster function
This cooker is fitted with a special automatic
heating system called Booster.
The function is engaged each time you
wish to use it. It functions like this:
Set the desired heat with
or
. Press
the Boost symbol
on the zone you want
to use or increase to
which can be seen
in the display with
. When this function
is engaged, the induction zones heat up with
a higher effect for a limited time (the effect
is decreased automatically to setting 9 after a
time). If the Booster is used at the same time
on the two rear or front zones, then the effect
will be reduced on one of the zones (this
occurs automatically).
24
Advertisement
Table of Contents
