GE Monogram ZIS42N Custom Options Manual And Installation Instructions page 29

Option 1 Installation
Step 3
Apply panel
Dimension A
support brackets
ZKT42–6-3/4"
Dimension B
ZKT42–7-7/8"
• Position support bracket on freezer panel,
• Position support bracket on fresh food panel,
Step 4
Install panels
• Place the 3/4" panel on the bottom trim with support
• Carefully drill starter holes in panel using a small
• Attach the panel to the top and hinge side by installing
• Follow the same procedure to install fresh food
• Re-install door handles with original screws.
Bottom Edge
dimension A, from the hinge side edge.
dimension B, from the hinge side edge.
bracket tabs inserted into slots. Push the panel back
against the steel door, making sure panel is flush to
hinge side trim.
drill bit.
screws from the back of the trim through the wood
panel.
door panel.
ZKT42 Trim Kit
Back Side Door Panel
Hinge
Support Bracket
Sde
A
Freezer Panels
• Secure support brackets to the bottom of the panels
with #4 screws provided. Align the brackets flush with
the bottom of the panels, with tabs protruding below.
• Bracket location measured from the hinge side, is the
same for panels with custom handles or standard
handles.
3/4" Custom Panels
Support Bracket
Bottom Edge
B
Fresh Food Panel
ZKT42 – Install 17 screws
29