Safety Instructions - Fluke i3000s Flex Series Instruction Sheet

Safety Instructions

In this instruction sheet, a Warning identifies conditions and
actions that pose hazard(s) to the user. A Caution identifies
conditions and actions that may damage the calibrator or the test
instruments.
To avoid electric shock or personal injury:
•
•
•
•
•
•
•
•
•
•
•
•
•
WX Warning
Use the Probes only if qualified.
Use caution during installation and use of
the Probe; high voltages and currents may
be present in circuit under test.
Have maintenance performed by only
qualified service personnel.
Protect the probe against water and
humidity.
Wear protective clothing and gloves as
required.
Do not install this product on live
conductors. Always de-energize the circuit
under test before installing the flexible
measuring head.
Always inspect the electronics unit,
connecting cable, and flexible measuring
head for damage before using the Probe.
Do not use the Probe if damaged.
Always connect Probe to display device
before installing the flexible measuring
head.
Never change batteries while measurement
head is installed on conductor.
Never connect or disconnect the external
power supply while the measurement head
is installed on a conductor.
Use only the provided original or specified
accessories.
Use the Current Probe only as specified in
the operating instructions; otherwise the
current probe's safety features may not
protect you.