Last Number Redial; Cid Call Back; Call Redirect - NEC DT310 User Manual

Last Number Redial

To Recall the Last Number Dialed
Press Redial. Receive special dial tone.
REDIAL[#]/SPEED[ ]
Press #. The number dialed will be redialed and
displayed.
REDIAL[#]/SPEED[ ]
Each time the Redial key is pressed the
Note:
numbers dialed for the last five calls are
displayed sequentially.
–1
2001
Last number dialed
–1
2001
Last number dialed

CID Call Back

To Search, Call Back, or Erase A Calling Number
Using Soft-keys.
Lift the handset or press Speaker key.
Press Message key.
Press Search soft key to search for desired
number.
Press CB soft key to call back desired number.
Press Erase soft key to erase desired number.
To Search, Call Back, or Erase A Calling Number
Without Using Soft-keys.
Lift the handset or press Speaker key.
Press Message key.
Dial 1 to search for desired number.
Dial 2 to call back desired number.
Dial 3 to erase desired number.

Call Redirect

To Redirect With Calling Party Information.
While in the CID mode press CRD key.
Call is transferred to a pre-assigned destination
station.
To Redirect Without Calling Party Information.
Press CRD key.
Press incoming line key or line key on hold.
Call is transferred to a pre-assigned destination
station.
See CID Display; Access to feature is based
Note:
on data assignment.
41