Access VIRUS Owner's Manual page 59

DEFINABLE 1 GLOBAL
This is where you enter the parameter assignment for the DEFINABLE 1 knob. The entry remains valid
regardless of the currently selected SINGLE PROGRAM. The entry is only active when DEFINABLE 1
MODE is set to GLOBAL or SINGLE; although in the latter case DEFINABLE 1 SINGLE in the current
SINGLE PROGRAM must be set to OFF before the entry is activated.
DEFINABLE 1 MIDI
This is where you enter the MIDI Controller assignment for the DEFINABLE 1 knob. The Controller is
routed via MIDI Out for the purpose of controlling a connected MIDI device. The entry is only active
when DEFINABLE 1 MODE is set to MIDI.
DEFINABLE 2 MODE
Selects the operating mode for the DEFINABLE 2 knob. You can select from:
The destination of the DEFINABLE 2 knob is defined via the Display page entitled
SINGLE
DEFINABLE 2 SINGLE (see paragraph below). If you set it to OFF, then the alternative
setting in the Display page - DEFINABLE 2 GLOBAL - is active.
The destination of the DEFINABLE 2 knob is always defined via the Display page entitled
GLOBAL
DEFINABLE 2
individual DEFINABLE SINGLE
The knob sends a variable MIDI Controller via the current PART's channel to MIDI OUT.
MIDI
For instance,
device. You can set the number of the MIDI Controller in the Display page DEFINABLE
2 MIDI (see paragraph below).
DEFINABLE 2 SINGLE
This is where you enter the parameter assignment for the DEFINABLE 2 knob. The entry is an element of
the current SINGLE PROGRAM and is stored along with it. The entry is only active when DEFINABLE 2
MODE is set to SINGLE. When DEFINABLE 2 SINGLE is set to OFF, the Display page setting DEFINABLE
2 GLOBAL is activated.
DEFINABLE 2 GLOBAL
This is where you enter the parameter assignment for the DEFINABLE 2 knob. The entry remains valid
regardless of the currently selected SINGLE PROGRAM. The entry is only active when DEFINABLE 2
MODE is set to GLOBAL or SINGLE; although in the latter case DEFINABLE 2 SINGLE in the current
SINGLE PROGRAM must be set to OFF before the entry is activated.
GLOBAL (see paragraph below).When you select the position GLOBAL,
settings are deactivated.
this feature lets you control the parameters of another connected MIDI
59