Access VIRUS Owner's Manual page 63

SYSTEM LCD CONTRAST
Lets you adjust the contrast of the LC display to different light conditions and viewing angles.
SYSTEM KNOB MODE
Provides a selection of several knob operating modes which you can activate depending on personal
preference or suitability to the tasks you currently dealing with:
The knobs are inactive.
OFF
In Jump Mode, the parameter jumps directly and absolutely to the value determined by
JUMP
the current position of the knob.
When you adjust a knob In Snap Mode, the original setting determines the value until
SNAP
the point where the movement of the knob passes beyond this position. The parameter
does not jump to the value as in JUMP Mode.
RELATIVE When you adjust a knob in RELATIVE Mode, the parameter is affected immediately but
not absolutely. The value change from the original value to the new value reflects
precisely the amount you adjusted via a given control.
KNOB DISPLAY
In an active menu, SYSTEM KNOB DISPLAY offers different display option for parameters that have
knobs assigned to them:
Knob movements are not displayed; the current contents of the display remain intact
OFF
when you turn a knob.
When you turn a knob, the current contents of the lower display line are briefly
SHORT
overwritten by data representing the change in parameter value; once the action is
completed, the original contents reappear in the lower display line.
Same as SHORT, except that - you guessed it - the display shows the knob data for a
LONG
longer period of time.
The contents of the display are overwritten when you turn a knob; the original menu
ON
does not reappear in the display.
63