Access VIRUS Owner's Manual page 64

VIRUS Owner's Manual
SYSTEM LED MODE
Here you can chose between two operating modes for the RATE LEDs of LFO 1 and 2:
The LEDs indicate the oscillations of the LFOs.
LFO
The LEDs serve as level indicators for the two external audio inputs (RATE 1 = Input L;
INPUT
RATE 2 = Input R). The brightness of the LEDs indicates the current input level; signal
saturation is indicated by rapidly flashing LEDs.
To achieve maximum sound quality for the system, you should set the input signal to a level
that is as close as possible to the saturation threshold. However you should avoid setting
the level beyond the saturation threshold, otherwise you will hear undesirable distortion in
the signal.
You can also use the level indicators to see if an input signal is actually patched in.
64