Output Select - Access VIRUS Owner's Manual

VIRUS Owner's Manual

OUTPUT SELECT

This control feature is used to select external or internal output of PART. You can chose from:
The left jack of dual Output 1 (mono)
OUT 1 L
Both jacks of dual Output 1 (stereo)
OUT 1 L+R
The right jack of dual Output 1 (mono)
OUT 1 R
The left jack of dual Output 2 (mono)
OUT 2 L
Both jacks of dual Output 2 (stereo)
OUT 2 L+R
The right jack of dual Output 2 (mono)
OUT 2 R
The left jack of dual Output 3 (mono)
OUT 3 L
Both jacks of dual Output 3 (stereo)
OUT 3 L+R
The right jack of dual Output 3 (mono)
OUT 3 R
The left channel of internal Aux 1 (mono)
AUX 1 L
Both channels of internal Aux 1 (stereo)
AUX 1 L+R
The right channel of internal Aux 1 (mono)
AUX 1 R
The left channel of internal Aux 2 (mono)
AUX 2 L
Both channels of internal Aux 2 (stereo)
AUX 2 L+R
The right channel of internal Aux 2 (mono)
AUX 2 R
If the selected output is monophonic,
program are inactive.
When you select an internal aux path as a signal output, you of course must route the signal of another
PART to this aux path via INPUT SELECT before you can establish a signal connection between the two
PARTS. Several PARTs can simultaneously access the external input or the internal aux paths via OUTPUT
SELECT.
In SINGLE MODE, OUTPUT SELECT does not appear in the menu; in this case Output 1 (stereo) is
preset.
66
then the Panorama settings and modulations in the sound