Sound Parameters In The Edit Menu (Single); Edit Mode; Output - Access VIRUS Owner's Manual

VIRUS Owner's Manual

Sound Parameters in the EDIT Menu (Single)

EDIT MODE

Switches between EXPERT MODE and EASY MODE. Menu parameters that are only available in the
EXPERT MODE are identified in the following section by an (EX).

OUTPUT

PATCH VOLUME
Storable master volume for the SINGLE program. Its nominal value is set to 100 so that you have a
reserve of 27 volume increments when you are dealing with exceptionally low-level sound settings.
PATCH VOLUME is not identical to the MIDI Standard Volume Controller 7. In MULTI MODE, you can
also access PART VOLUME (see appropriate section), which provides further volume reserves
(headroom).
PANORAMA
Determines the Panorama position of the SINGLE program.
OUTPUT SELECT
This PART parameter is a MULTI MODE parameter and is stored along with the current MULTI
PROGRAM. Consequently, it is available in MULTI MODE. It is also available in the SINGLE
CTRL menu when MULTI SINGLE MODE is active. Why? Because it comes in handy when you
are working with sequencers.
This control feature is used to select the external or internal output of the PART. You can chose from:
The left jack of dual Output 1 (mono)
OUT 1 L
Both jacks of dual Output 1 (stereo)
OUT 1 L+R
The right jack of dual Output 1 (mono)
OUT 1 R
The left jack of dual Output 2 (mono)
OUT 2 L
38