Ending Calls When Using A Headset; Returning To The Headset After A Long Delay - 3Com 2101 Telephone Manual

64 C 6: P
HAPTER ERSONALIZING
Ending Calls When
Using a Headset
Returning to the
Headset After a
Long Delay
Y T
OUR ELEPHONE
To end calls when using a headset with:
An NBX Business Telephone, press the Release button.
■
An NBX Basic Telephone, press the Feature button and 111.
■
Certain brands of headsets have a power-saving mode that prevents the
telephone from ringing for one or more calls when both of these
circumstances are true:
The headset amplifier buttons for Mute and On are both set to On.
■
The handset is off the phone for a long time (for instance, overnight).
■
It may take a few minutes for your headset to return from the
power-saving mode to the active mode when calls first come in, so your
telephone may not ring until the headset has returned to active mode,
and you may miss a call.
If you plan to not use the headset for a long time (for instance,
overnight), 3Com recommends that you set the mute and headset
buttons on the amplifier to Off and hang up the handset on your
telephone. When you are ready to receive calls again, set up the headset
for receiving calls:
1 Pick up the handset on your telephone and lay it down on your desk.
2 Put on the headset. On the amplifier, set headset button to On.