Oce 3165 User Manual page 96

By default the option 'TrueType [Type 42]' is selected to print fonts which
are not available on the printer. In this case, all fonts are sent to the printer as
outlines.
If you are not satisfied with the print quality (especially of large font sizes),
select the option 'Bitmap [Type 3]'. All fonts are sent as bitmap to the printer
and are printed in the highest possible quality. However, as all detailed font
information is included in the PS file, printing sometimes slows down
tremendously.
If you are not satisfied with the print quality of small fonts, select 'Adobe
[Type 1]'. Fonts 9 pts are sent to the printer as outline fonts, fonts < 9 pts
are sent as a bitmap.
[49] The 'Fonts' tab of the setup window of the Océ 3165 Network CopierPS printer driver
Select the required 'Use Printer Fonts for all TrueType Fonts' setting:
4
if selected (= default), TrueType fonts on your PC (when used) are
substituted by a next best printer font (if no reasonable alternative font is
found in the list of 43 printer fonts, Courier will be used). TrueType fonts are
identified with a TT symbol in the fonts list in the Control Panel.
if deselected, no substitution takes place and all font information will be
included in the print file, resulting in a What-You-See-Is-What-You-Get
representation of your document. However, print files will become much
larger and will take more network capacity. Therefore, when you deselect the
'Use Printer Fonts for all TrueType Fonts' box, the 'Use Substitution Table'
setting becomes selectable.
96 Océ 3165 User Manual