Oce 3165 User Manual page 67

Please be aware that originals with landscape oriented information are
Note:
printed onto copy material whereas originals with portrait oriented
information are printed onto
If you are copying originals with landscape oriented information, you need to
use the function 'Switch images' to ensure that two consecutive page are
printed in the correct sequence.
[40] Switch images function
If you want your job to be printed 2-sided onto the copy material, four original
pages will be needed to fill both sides of the copy. When copying 2-sided, you
will also have to identify the required binding edge for the copies (see
'Defining the location and size of the binding edge' on page 57) in order to
select a booklet form or a calendar form for your output.
If you are using 2-sided originals for copying, you should indicate the binding
edge of your originals as well to ensure that the front and back page of the
originals are copied in right position onto the copy material.
Copying two portrait oriented originals onto one page side
Place your originals in long-edge feed position in the automatic feeder.
1
It is not possible to staple your output as your output will be on A4
Note:
. You should staple your output manually. Placing your originals in
short-edge feed position in the automatic feeder will enable you to staple
your copies.
Indicate whether the originals are 1 or 2-sided and choose 1 or 2-sided copies
2
using the 'Original' and 'Copy' function buttons.
Open the 'Extra' section.
3
Select the 'Layout' settings.
4
Press the function button 'Layout' and select '2-images'.
5
The Océ 3165 will automatically select A4
If required, open the section 'Paper', select the 'Paper input' settings and select
6
another paper size.
Extended copy jobs
material.
and the required zoom factor.
67