Copying Sets Of A4 Originals - Oce 3165 User Manual

Copying sets of A4 originals

The quickest way to copy documents with multiple pages is to use the
automatic feeder (see figure 14). Put the set of originals, with the first printed
side facing down, in the automatic feeder. Be sure that the originals lie
correctly between the original guides. Refer to the instruction sticker on the
automatic feeder.
[14] Automatic input
The automatic feeder holds a maximum of 50 sheets of A4 paper (80 g/m
a time or 35 sheets of A3. In this way, the feeder takes one sheet at a time. If
your report contains more than 50 sheets, you can add more originals as
scanning proceeds (up to memory limit) and space is again available in the
automatic feeder. If only one copy is made of your report, the memory is
unlimited as pages are removed from the memory as soon as they are printed.
The automatic feeder can handle both single-sided and double-sided originals.
Naturally the copies can also be printed either single-sided or double-sided.
You can indicate this with the 'Original' and 'Copy' function buttons. As the
required paper size is automatically selected, you only need to enter the desired
number of copies, and press the start button ( ).
Sets of A4-copies can be stapled automatically (see 'Stapling copies' on
page 38). However, it is then important that the A4 originals are fed in using
the long side (portrait orientation as viewed by the operator). And, you can use
covers, separation sheets, appendices and blank pages (see chapter 3,
36 Océ 3165 User Manual
set of
originals
2
) at