Specifications - 35C Three - Westerbeke 8.0KW-60Hz Service Manual

SPECIFICATIONS 35C THREE ENGINE
SPECIFICATIONS
Engine Type
Displacement
Aspiration
Combustion Chamber
Bore & Stroke
Firing Order
Direction of Rotation
Compression Ratio
Dimensions
v
inches (mm)
Engine
On~
Weight
Inclination
Diesel, fourvcycle, three-cylinder, fresh water-
cooled, vertical in-line overhead valve
mechanism ..
80A cubic inches (1.318 liter)
Natural~
aspirated.
Swirl type.
3.07 x 3.62 inches (78 x 92 mm)
1 - 3 - 2
Clockwise, when viewed from the front.
22:1
Height:
Width:
Length:
21.6 inches
20.1 inches
22.4inches
(540.6 mm)
(510.5 mm)
(596 mm)
2761bs (276 kgs) without transmission.
Continuous 1S Q
Temporar; 25° (not to exceed 30 min.)
TUNE-UP SPECIFICATIONS
Compression Pressure
MiDimum
Valve Timing
Spilled liming (Static)
Valve Seat Angle
Engine Timing
Injector Pressure
Valve Seat Angle
427 psi (30 kg/cm') at 280 rpm
384 psi (27 kg/cm')
Intake Opens
Intake Closes
17° (spill)
45°
17" BTDC
1991 + 71 - 0 psi (140 + 5 - 0 kgf/cm').
Intake 45°
Exhaust 30°
General
Fuel
Fuel Injection Pump
Fuel Injection Timing
Nozzle
Fuel Filter
Air cleaner
Air Flow
(engine combustion)
Fuel Lift Pump
FUEL SYSTEM
Open flow, self priming.
No.2 diesel oil (cetane rating of 45 or higher).
In-line plunger type (BOSCH).
0° TOC (Top Dead Center).
Throttle type.
Spin-on replaceable (PN#024363) ..
Replaceable paper filter cartridge.
140 cfm (3.9 cmm) at 3600 rpm.
12 volt DC lift capacity of 5' (1.5 mm) solid state
ELECTRICAL SYSTEM
Starting Batter;
Batter; Capacity
DC Charging Alternator
Starting Aid
Starter
General
Operating Temperature
Fresh Water Pump
Raw Water Pump
System Capacity
(Fresh Water)
12 Volt, (-) negative ground
400 - 600 Cold Cranking Amps (CCA)
51 Amp rated, belt-driven
Glow plugs, sheathed type
12 Volt, reduction gear
COOLING SYSTEM
Fresh water-cooled block, thermostatically-
controlled with heat exchanger.
170 -190° F (77 - 88° C)
Centrifugal type, metal impeller, belt-driven.
Positive displacement. rubber impeller,
belt-driven.
1.9 US qts (1.8 liters)
LUBRICATION SYSTEM
General
Oil Filter
Sump Capacity
(not including filter)
Operating Oil Pressure
(engine hot)
Oil Grade
Pressure fed system.
Fun flow, paper element, spin-on type.
3.9 U.S. qts (3.7 liters)
50 - 60 psi (3.5 - 4.2 kg/cm')
API Specification CF or CG-4,
Engines
&
Generators
59