Chapter 1: Understanding Your New System; The Accu-Chek Compact Plus System - Accu-Chek COMPACT PLUS Owner's Booklet
Hide thumbs
Also See for COMPACT PLUS:
- User manual (440 pages) ,
- Owner's booklet (244 pages) ,
- Reference manual (212 pages)
Table of Contents
Advertisement
Chapter 1: Understanding Your New System
The ACCU-CHEK Compact Plus System
Display –
Shows blood
sugar results,
messages, and
results stored in
memory.
M Button –
Press this button
to review results in
memory.
Drum Door –
Covers the
compartment where
the test drum goes.
Test Strip Slot –
Test strips come out
of the meter here.
Test/On/Off Button –
Slide and release this
button to turn on the
meter and advance a
test strip. Also, at the
completion of a test,
slide and release this
button to turn off the
meter and release
the test strip.
S Button –
Press this button to
set the beeper, year,
time, and date.
Drum Door Tab –
Lift up on this tab to
open the drum door.
Release Button –
Slide to release the
attached lancing
device. You can
use your lancing
device attached or
unattached.
Battery Cover –
Slide the cover
to unlock and
open the battery
compartment.
Test Strip Count
Window – Shows
the number of test
strips remaining in
a test drum.
8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the COMPACT PLUS and is the answer not in the manual?
Questions and answers
change battery
To change the battery in an Accu-Chek COMPACT PLUS:
1. Ensure the meter is off.
2. Locate the battery cover and ensure it is flat.
3. Remove the battery cover.
4. Take out both AAA batteries.
5. Insert two new long-lasting alkaline AAA batteries of the same brand.
6. Try to insert the new batteries within two minutes to avoid resetting the time and date.
7. If possible, wait until the current test drum is empty before replacing the batteries.
8. Push the battery cover in the direction of the arrow to lock it in place.
If the drum door is opened while the batteries are out, you may need to reset the time and date.
This answer is automatically generated