Accu-Chek COMPACT PLUS Owner's Booklet page 77
Hide thumbs
Also See for COMPACT PLUS:
- User manual (440 pages) ,
- Owner's booklet (244 pages) ,
- Reference manual (212 pages)
Table of Contents
Advertisement
To make sure the display is working
properly, turn off the meter, then
press and hold down
the complete display. All the
sections should be clear and should
look exactly like the display as
shown. If not, call the ACCU-CHEK
Customer Care Service Center at
1-800-858-8072.
This reading may not be
accurate because the test was
performed outside the proper
temperature range for the system;
50 °F to 104 °F. Results are
displayed at temperatures within
41 °F to 113 °F.
Example
Chapter 5: Maintenance and Troubleshooting
M
M
to see
75
ACCU-CHEK Customer Care Service Center 1-800-858-8072
The temperature is below or
above the proper range for
the meter, below 41 °F or
above 113 °F. Move to an area
between 50 °F and 104 °F,
wait 30 minutes or more
and repeat the test. Do not
artificially heat or cool the
meter.
This can be shown three
different ways: E20 and the
temperature symbol together,
E20 without the temperature
symbol, or the temperature
symbol without E20.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the COMPACT PLUS and is the answer not in the manual?
Questions and answers
change battery
To change the battery in an Accu-Chek COMPACT PLUS:
1. Ensure the meter is off.
2. Locate the battery cover and ensure it is flat.
3. Remove the battery cover.
4. Take out both AAA batteries.
5. Insert two new long-lasting alkaline AAA batteries of the same brand.
6. Try to insert the new batteries within two minutes to avoid resetting the time and date.
7. If possible, wait until the current test drum is empty before replacing the batteries.
8. Push the battery cover in the direction of the arrow to lock it in place.
If the drum door is opened while the batteries are out, you may need to reset the time and date.
This answer is automatically generated