Accu-Chek COMPACT PLUS Owner's Booklet page 30
Hide thumbs
Also See for COMPACT PLUS:
- User manual (440 pages) ,
- Owner's booklet (244 pages) ,
- Reference manual (212 pages)
Table of Contents
Advertisement
Notes:
• The meter uses two AAA batteries. Use long-lasting alkaline (not rechargeable) batteries and keep
an extra pair on hand.
• Always replace both batteries at the same time and with the same brand.
• When changing the batteries, try to insert the new batteries within two minutes. If it takes longer
than two minutes, you may need to reset the time and date.
• Try to wait until the current test drum you are using is empty before replacing the batteries.
Otherwise, the meter may take some time to advance to the next test strip and may give an
incorrect use-by date warning.
• If you open the drum door while the batteries are out of the meter, you may need to reset the time
and date, but all test results stay in the memory.
• If you press any button while the batteries are out of the meter, you will need to reset the time and
date.
• If the meter is turned on and you decide not to run a test, the meter turns off automatically after
five minutes.
• The battery symbol on the display means the batteries are low and should be changed soon.
• If you turn on the meter and the display goes blank, no more tests can be run until the batteries
are replaced.
Chapter 1: Understanding Your New System
28
ACCU-CHEK Customer Care Service Center 1-800-858-8072
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the COMPACT PLUS and is the answer not in the manual?
Questions and answers
change battery
To change the battery in an Accu-Chek COMPACT PLUS:
1. Ensure the meter is off.
2. Locate the battery cover and ensure it is flat.
3. Remove the battery cover.
4. Take out both AAA batteries.
5. Insert two new long-lasting alkaline AAA batteries of the same brand.
6. Try to insert the new batteries within two minutes to avoid resetting the time and date.
7. If possible, wait until the current test drum is empty before replacing the batteries.
8. Push the battery cover in the direction of the arrow to lock it in place.
If the drum door is opened while the batteries are out, you may need to reset the time and date.
This answer is automatically generated