SIMPLY REMOVE ONE STRIP FROM
YOUR SPILL-RESISTANT VIAL.
Using your thumb or whichever finger is most
Using your thumb or whichever finger is most
Using your thumb or whichever finger is most
comfortable for you, try one of these 4 techniques
comfortable for you, try one of these 4 techniques
comfortable for you, try one of these 4 techniques
to find which one works best for you.
to find which one works best for you.
to find which one works best for you.
Remember to follow all instructions in the package insert, including:
• Wash and dry hands thoroughly
• Do not bend the test strips
1
Place any finger on the front test strip and press in
while sliding your finger up to raise, then pull it out.
3
Place your index finger on top of the test strips. Then
with your thumb, press in against the test strips and
slide the front test strip up to pull it out in one motion.
• Do not get dirt on the test strip
• Close the cap tightly when finished
2
Grasp the sides of the outermost test strip with a
pinching action as you pull up.
4
Place your finger on the back test strip and press
in against the test strips. Slide your finger up to
raise, then pull it out.
9700277001
Need help?
Do you have a question about the Guide CA-1423 and is the answer not in the manual?
Questions and answers