Setting The Year, Time, And Date - Accu-Chek COMPACT PLUS Owner's Booklet
Hide thumbs
Also See for COMPACT PLUS:
- User manual (440 pages) ,
- Owner's booklet (244 pages) ,
- Reference manual (212 pages)
Table of Contents
Advertisement
BEEPER
Setting the Year, Time, and Date
Your new meter comes with the batteries already installed and a preset time and date. You may need
to change the time to your time zone. Setting the time and date is important if you use the meter's
memory or download your stored results to a computer.
1. With the meter off, press
mode. The meter turns on and briefly shows
all of the display symbols. Next, the beeper
symbol is displayed with your current selection
flashing.
Chapter 1: Understanding Your New System
BRIGHTNESS
S
S
to enter the set
You are here
TIME / DATE
TEST REMINDERS
S
S
2. Press
twice to reach the year with the last
two numbers of the year flashing. Press
change the year. Press
14
ACCU-CHEK Customer Care Service Center 1-800-858-8072
HYPO
M
M
to
S
S
to set your selection.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the COMPACT PLUS and is the answer not in the manual?
Questions and answers
change battery
To change the battery in an Accu-Chek COMPACT PLUS:
1. Ensure the meter is off.
2. Locate the battery cover and ensure it is flat.
3. Remove the battery cover.
4. Take out both AAA batteries.
5. Insert two new long-lasting alkaline AAA batteries of the same brand.
6. Try to insert the new batteries within two minutes to avoid resetting the time and date.
7. If possible, wait until the current test drum is empty before replacing the batteries.
8. Push the battery cover in the direction of the arrow to lock it in place.
If the drum door is opened while the batteries are out, you may need to reset the time and date.
This answer is automatically generated