Abit PR5 User Manual page 68

Video Off Option
This governs in what modes the video display gets turned
off. The options are:
Susp,Stby-> Off
Susp-> Off
All Modes Off
Always On
Modem Use IRQ
If you have a modem installed in your system you can
enter which IRQ it is using so that APM can control it.
The default setting is NA (Not Applicable).
Doze Mode
This sets the period of system inactivity after which the
system goes into Doze mode, the most limited power
saving state. The settings range from 1 minute to 1 hour
and can be set manually when power management is in
User Define mode. The default setting is Disabled. When
the system goes into power saving mode, power man-
agement will skip to the next mode in the sequence if
this is disabled.
Standby Mode
This sets the period of system inactivity after which the
system goes into Standby mode, the intermediate power
saving state. The settings range from 1 minute to 1 hour
and can be set manually when power management is in
User Define mode. The default setting is Disabled. When
the system goes into power saving mode, power man-
agement will skip to the next mode in the sequence if
this is disabled.
Suspend Mode
This sets the period of system inactivity after which the
system goes into Suspend mode, the maximum power
saving state. The settings range from 1 minute to 1 hour
and can be set manually when power management is in
User Define mode. The default setting is Disabled. When
the system goes into power saving mode, power man-
agement will skip to the next mode in the sequence if
this is disabled.
(Off in Suspend & Standby)
(Off in Suspend)
(Off in Doze, Suspend & Standby)
(No video shut off)