Ide Activity Led Connector; Cpu Fan Power Connector - Abit PR5 User Manual

IDE Activity LED Connector

The IDE activity LED connector is a 4-pin connector
which will accept either a 2-pin or 4-pin IDE LED activ-
ity light connector. This light comes on when an IDE
device in your system is being accessed. If you are con-
necting a lead from an LED activity light on your case,
make sure you identify which wire is the positive wire
and orient the lead' s connector so that the positive wire
connects to the positive pin on the onboard connector.
The pin connector assignments are in the Configuration
Quick Reference if you need them.

CPU Fan Power Connector

The CPU fan power connector is a 3-pin connector header
which will accept either a 2-pin or 3-pin CPU fan power
lead connector. Some CPU fans have a connector for a
standard power lead from the system power supply. If
your CPU fan is attached to the top of the CPU chip, as
with some Intel Pentiums, the power lead connector
should fit this onboard connector. If you are connecting a
lead from a CPU cooling fan to this connector, make sure
you identify which wire is the positive wire and orient
the lead' s connector so that the positive wire connects to
the positive pin on the onboard connector. The pin con-
nector assignments are in the Configuration Quick Ref-
erence if you need them.