Abit PR5 User Manual page 63

IDE HDD Block Mode
This mode improves performance by making multi-sec-
tor transfers from the hard disk instead of one sector per
transfer. Older IDE drives may not support this feature.
The default setting is Enabled.
Typematic Rate Setting
When enabled, you can set the two keyboard typematic
controls that follow. The default setting is Disabled.
Typematic Rate (Char/Sec)
Adjusts the keystroke repeat rate. The choices range from
6 to 30 characters per second. The default is 30.
Typematic Delay (Msec)
Adjusts the character display interval (the time between
the display of one character and the next. There are four
delay rate choices measured in milliseconds: 250, 500,
750 and 1000. The default is 250.
Security Option
This sets when password protection is used. The two
options are:
System – Password required at boot up
Setup – Password controls access to Setup utility
You create a password using the Password Setting op-
tion in the main menu. If no password is set, the system
ignores this item.
PCI/VGA Palette Snoop
If your video display card has an MPEG card attached to
the feature connector, the display may invert to black on
white while booting. If this happens with your system
configuration, enable this feature to correct the problem.
The default setting is Disabled.