Abit PR5 User Manual page 66

Power Management
PM Control By APM
Video Off Method
Video Off Option
Modem Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
** Wake Up Events In Doze & Standby **
IRQ3 (Wake Up Event) : ON
IRQ4 (Wake Up Event) : ON
IRQ8 (Wake Up Event) : OFF
IRQ12 (Wake Up Event) : ON
Award BIOS Power Management Setup
Power Management Setup
To enter this section of the Setup program, highlight this
menu item in the main menu and press the Enter key.
The following screen will appear.
ROM PCI/ISA BIOS (XXXXXXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE INC.
** Power Down & Resume Event **
: User Define
IRQ3
: Yes
IRQ4
: V/H SYNC+Blank
: Susp,Stdby->Off IRQ5
: NA IRQ6
IRQ7
: Disable IRQ8
: Disable IRQ9
: Disable IRQ10 (Reserved)
: Disable IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
ESC : Quit
F1
F5
F6
F7
Menu Commands
The menu commands for this screen are the same as for
the BIOS Features Setup screen.
What Power Management Does
Power management lets you set up your computer to save
electricity when it is not actively in use by putting the
system into progressively greater power saving modes.
In the power management scheme there are four system
states which proceed in the following sequence:
Normal
D o z e
Standby
Suspend
(COM 2) : ON
(COM 1) : ON
(LPT 2) : ON
(Floppy Disk) : ON
(LPT 1) : ON
(RTC Alarm) : OFF
(IRQ2 Redir) : ON
: ON
: ON
: ON
: ON
: ON
: ON
:Select Item
: Help PU/PD/+/-
: Old Values (SHIFT)F2
: Load BIOS Defaults
: Load Setup Defaults
: Modify
: Color