Reference; Using The Remote Controller; (Only For Kw-Avx838/Kw-Avx738) - JVC KW-AVX838 Instructions Manual

REFERENCE

Using the remote controller

For KW-AVX830/KW-ADV793: To use the remote controller, purchase RM-RK252P separately.
Installing the batteries
Insert the batteries (not supplied) into the remote controller by matching the polarity
(+ and –) correctly.
Caution:
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
If the effectiveness of the remote controller decreases, replace the batteries.
Before using the remote controller:
• Aim the remote controller directly at the remote sensor on the unit.
• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).
The unit is equipped with the steering wheel remote control function.
• See the Installation/Connection Manual (separate volume) for connection.
• Operations may differ depending on the types of the steering wheel remote control.
Operations using the remote controller (RM-RK252)
If the remote controller does not work, try following;
• Deactivate Dual Zone. (
operating the DVD/CD player.)
• Replace the battery.
Button Source
1
*
—
1
*
—
1
Only for KW-AVX838/KW-AVX830: When Dual Zone is activated, these buttons cannot be used.
*
28) (While Dual Zone is activated, the remote controller only functions for
• Turns the power on.
• Turns the power off. (Hold)
• Attenuates/restores the sound.
Changes the display information.
53

(Only for KW-AVX838/KW-AVX738)

KW-AVX838
R03/LR03/AAA
Operations
KW-AVX738
Continued on the next page