Bluetooth Device Settings - JVC KW-AVX838 Instructions Manual

Bluetooth device settings

Menu item
1
Dial Menu *
Phone Connect*
Audio Connect*
Phone Disconnect*
Audio Disconnect*
Delete Pairing
New Pairing
Auto Connect
Auto Answer
SMS Notify
Add Phonebook
MIC Setting
Phone Volume
*
1
Only for the device connected for Bluetooth phone.
*
2
When a device has already been connected to the unit, <Phone Connect> and <Audio Connect> do not appear
and vice versa.
Bluetooth
Selectable setting/item
Select a calling method, then select the desired item to call. (
2
/ Only for the registered devices.
2
Select a device from among the registered devices, establish the connection
with it.
2
/ Only for the device being connected.
2
Disconnect the current device before connecting another device.
( 38)
( 37)
When the unit is turned on, the connection is established automatically
with...
z
Off : No Bluetooth device.
z
Last : The last connected Bluetooth device.
z
Off : The unit does not answer the calls automatically. Answer the
calls manually.
z
On : The unit answers the incoming calls automatically.
z
Off : The unit does not inform you of the arrival of a message.
z
On : The unit informs you of the arrival of a message by ringing
and displaying "Receiving Message."
You can copy the phone book memory of a mobile phone into the unit.
( 42)
Adjust the volume of the microphone connected to the unit.
z
01/02/03
Adjust the phone volume.
z
00 to 30 or 50, Initial 15
• The adjustable range depends on the amplifier gain control. (
44
KW-AVX838
Bluetooth
Enter
Dial Menu
Enter
Device Menu
Settings Enter
KW-AVX830
Initial: Underlined
41)
35)