2
Show the title entry screen.
Title assignment
More about this unit
Turning off the power
• Ifyou turn off the power while listening to atrack,
playback will start from where it had been stopped
previously next time you turn on the power.
• Basic operations
Turning on the power
• By pressing SRC or AUX button on the unit, you
can also turn on the power. If the source is ready,
playback also starts.
BEL
DIBP
•
•
You can assign titles to 30 station frequencies (FM and
AM) using 8 characters (maximum) for each title.
• When HD Radio tuner box is connected, this feature
will be disable.
1
Select FMlAM.
3
Assign atitle.
[I] Select acharacter.
[Turn]
W
Move to the next (or previous) character
position.
[l]
Repeat steps [I] and
W
until you finish
entering the title.
4
Finish the procedure.
BEL
General
• If you change the source while listening to adisc,
playback stops.
Next time you select "CD" as the playback source,
playback will start from where it had been stopped
previously.
• After ejecting adisc, "NO DISC" appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
• Tuner operations
Storing stations in memory
• During SSM search...
- All previously stored stations are erased and the
stations are stored anew.
- Received stations are preset in NO.1 (lowest
frequency) to No.6 (highest frequency).
- When SSM is over, the station stored in NO.1 will
be automatically tuned in.
• When storing astation manually, the previously
preset station is erased when anew station is stored
in the same preset number.
To erase the entire title
In step 2 above...
[Hold]
DIBP
BEL
Continued on the nextpage
SETTINGS & REFERENCE
25