Lennox EDV3530CNM-B Installation Instructions Manual page 28

2
4
Locating Pins
2
Align The Holes In One End Of Logs 2 & 3 Over The
Locating Pins And Align The Grooves On The Other
End Over The Grate And Push It Toward The Rear
28
EDV3530 LOG PLACEMENT
1
3
5
6
1
Align Groove At The Bottom
Of Log (1) Over The Grate And
Push It Towards The Rear.
Locating Pin
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log
Number
1
2
3
4
5
6
Catalog Number for the entire log set: 55M02
Align The Hole On The Log (5) Over The Locating Pin
And Postition The Notch Over The Grate As Shown
4
Align The Groove In The Bottom Of Log (4) Over
The Grate And Slide It Toward The Front.
3
6
Position The Grooves On Log (6)
Against The Grate As Shown
Figure 56
Description Number
Log, Rear 55M06
Log, Diagonal/Left 55M07
Log, Diagonal/Right 55M08
Log, Front/Left 55M09
Log, Top/Right 55M10
Log, Front/Center 55M11
Part
5