Speaker Assembly - HP Compaq 6715b Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/WLAN module compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Switch cover (see
f. Display assembly (see
g. Top cover (see
Remove the speaker assembly:
1. Disconnect the speaker cable (1) from the PC Card/audio board assembly.
2. Remove the two Phillips PM2.5×5.0 screws (2) that secure the speaker assembly to the base
enclosure.
Battery on page 52).
Hard drive on page 56)
Optical drive on page
Keyboard on page 68)
Switch cover on page
Display assembly on page
Top cover on page 85)
Expansion memory module on page
66)
74)
80)
Component replacement procedures
Spare part number
443821-001
60)
89