HP Compaq 6715b Maintenance And Service Manual page 89

5. Release the keyboard (see
6. Remove the switch cover (see
7.
Remove the fan (see
8. Remove the heat sink (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
on the processor slot when you install the processor. The illustration below shows the processor
removal steps for the HP Compaq 6715 computer model.
NOTE: The illustration below shows the processor removal steps for the HP Compaq 6710
computer model.
Reverse this procedure to install the processor.
Keyboard on page
Switch cover on page
Fan on page 75).
Heat sink on page
68).
74).
76).
Component replacement procedures
79