Fan - HP Compaq 6715b Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Release the keyboard (see
6. Remove the switch cover (see
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
NOTE:
model. The fan cable on the HP Compaq 6710 computer model is in a different location, but the
disconnection steps are the same.
2. Loosen the Phillips PM2.5×8.0 captive screw (2) that secures the fan to the computer.
3. Remove the Phillips PM2.5×8.0 screw (3) that secures the fan to the computer.
4. Remove the fan (4).
Reverse this procedure to install the fan.
Battery on page
Keyboard on page
Switch cover on page
The illustration below shows the fan removal steps for the HP Compaq 6715 computer
52).
68).
74).
Component replacement procedures
Spare part number
443917-001
75