Filtering Mode - DeDietrich Cooker hood Manual To Installation

2 / INSTALLING YOUR APPLIANCE

Filtering mode

•
- Assemble the tube support using a 4 screws kit
(Fig.7).
- Then, by means of the screw anchors and
screws (F) provided, fix the bracket to the ceiling
in such a way that it is positioned along the axis with
your hood (Fig.8).
- Mount the flange on the hood in correspondence
to the air outlet point (Fig.12).
- Take the air baffle and fit a flexible pipe to it (125
mm diameter) locking it with a metal hose clamp
(pipe and clamps are not provided). Fit the air
baffle to the upper flue (Fig.13) with 4 screws.
- Connect the flexible pipe to the flange on the air
vent (Fig.14).
- Plug in the hood.
- Insert the extension flues setting them on the
hood; extend the upper flue to the ceiling and
secure with the 2 screws H (Fig.11).
fig. 10
26
EN
fig. 11
fig. 12
fig. 13
fig. 14