Table of Contents
Advertisement
User's Manual
5
Using with AMS Device Manager
Topics covered in this chapter:
•
Adding a network component
•
Configuring fieldbus devices
5.1
Adding a network component
An FF HSE network component has to be present in AMS Device Manager to
be able to use the USB Fieldbus Interface with AMS Device Manager.
Notes
•
If there is an existing FF HSE network configured due to another fieldbus device, you do
not need to add a new FF HSE network component.
•
You must have an updated license file that includes an HSE license. The HSE license
enables you to add an FF HSE network component in AMS Device Manager.
If you do not yet have an HSE license, contact your Emerson sales representative and place
an order for part number AW7060HSE.
1. Click Start > All Programs > AMS Device Manager > Network
Configuration to open the AMS Device Manager Network Configuration
utility.
30
June 2012
Advertisement
Table of Contents
Need help?
Do you have a question about the USB Fieldbus Interface and is the answer not in the manual?