Table of Contents
Advertisement
June 2012
1
Introduction
This manual will guide you in using the USB Fieldbus Interface (interface).
Included here are basic setup, configuration, and troubleshooting
information, as well as guidelines on how to use the interface with AMS Suite:
Intelligent Device Manager.
This manual is divided into the following sections:
•
Chapter 1: Introduction – contains safety messages and information
about the manual.
•
Chapter 2: USB Fieldbus Interface – contains information about the
interface, its parts, usage, and features.
•
Chapter 3: Software installation and device setup – contains
system requirements, software installation instructions, and device
setup information.
•
Chapter 4: Using the Fieldbus Device Configuration utility –
contains information on how to use the utility to power, commission,
and/or configure parameters of fieldbus devices.
•
Chapter 5: Using with AMS Device Manager – contains setup
information and instructions in using the interface with AMS Device
Manager to configure fieldbus devices.
•
Chapter 6: Troubleshooting – contains solutions to the most
common operating problems.
•
Appendix A: Approvals and certifications – contains certifications
and approval information.
•
Appendix B: Specifications – contains specifications such as
operating temperature, software, electrical information, and
environmental considerations.
•
Appendix C: Waste disposal – contains the interface disposal
guidelines.
•
Appendix D: Removing pre-release version of drivers on a
Windows XP operating system – contains instructions on how to
remove previous driver versions.
User's Manual
3
Advertisement
Table of Contents
Need help?
Do you have a question about the USB Fieldbus Interface and is the answer not in the manual?
Questions and answers