HP Compaq Pro 6305 Maintenance And Service Manual page 84

Microtower business pc & small form factor business pc
Hide thumbs Also See for Compaq Pro 6305:
Table of Contents

Advertisement

6.
Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA
connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all
the way into the connector on the carrier's circuit board.
Figure 6-32
7.
Replace the four screws in the bottom of the carrier to hold the drive securely in place.
Figure 6-33
76
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Replacing the Hard Drive
Replacing the Security Screws

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents