Recovering The Configuration Settings - HP Compaq Pro 6305 Maintenance And Service Manual

Table 3-6 Computer Setup—Advanced (for advanced users) (continued)
PCI VGA
Configuration
ASF Configuration

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command
with the Computer Setup (F10) Utility before Restore is needed.
NOTE: It is recommended that you save any modified computer configuration settings to a USB
flash media device and save the device for possible future use.
To restore the configuration, insert the USB flash media device with the saved configuration and
perform the Restore from Removable Media command with the Computer Setup (F10) Utility.
Displayed only if there is an add-in video card in the system. Allows you to specify which VGA
controller will be the "boot" or primary VGA controller.
NOTE: In order to see this entry, you must enable Integrated Video (Advanced > Device
Options) and Save Changes and Exit.
ASF (Alert Standard Format) is an industry standards-based technology that allows IT
administrators to manage PCs regardless of operating system state. ASF performs completely out
of band and only relies on the operating system to configure the solution.
Allows you to set:
●
ASF Support (enable/disable). Allows you to enable or disable ASF. Default is enabled.
●
ASF BIOS Mode (On/Alert Only/Off). Allows you set ASF BIOS mode to on, off, or only send
alerts. Default is On.
●
ASF Watchdog Timer (enable/disable). A timer started at system startup and cleared at the
end of POST. If the timer is not cleared within the specified amount of time, the hardware
sends an alert to the Management Console indicating the system has hung.
If enabled, this setting allows you to set the watchdog timer. Default is enabled.
Recovering the Configuration Settings 21