HP Compaq Pro 6305 Maintenance And Service Manual page 122
Microtower business pc & small form factor business pc
Hide thumbs
Also See for Compaq Pro 6305:
- Maintenance and service manual (232 pages) ,
- Specification (60 pages) ,
- Installation manual (21 pages)
Table of Contents
Advertisement
5.
Connect the appropriate drive cables:
a.
If installing a second hard drive, connect the power cable (1) and data cable (2) to the rear
of the drive and connect the other end of the data cable to the light blue connector on the
system board labeled SATA1.
Figure 7-23
b.
If installing a media card reader, connect the USB cable from the media card reader to the
USB connector on the system board labeled MEDIA.
Figure 7-24
NOTE:
board drive connectors.
6.
Replace the 5.25-inch drive.
7.
Replace the front bezel (if removed) and access panel.
8.
If the computer was on a stand, replace the stand.
114 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Connecting the Secondary Hard Drive Power Cable and Data Cable
Connecting the Media Card Reader USB Cable
Refer to
System Board Connections on page 105
for an illustration of the system
Hide quick links:
Advertisement
Table of Contents
