Brother MFC-J4510DW Basic User's Manual page 44

Chapter 2
NOTE
• DO NOT press the paper guides too tightly
against the paper. Doing this may cause
the paper to fold.
• Place the paper in the centre of the
manual feed slot between the paper
guides. If the paper is not centred, pull it
out and insert it again at the centre
position.
e
Using both hands, put one sheet of
paper in the manual feed slot until the
front edge touches the paper feed roller.
Let go of the paper when you hear the
machine pull it in a short distance. The
Touchscreen will show
Manual Feed Slot ready.
NOTE
• When loading an envelope or a sheet of
thick paper, push the envelope into the
manual feed slot until you feel it grab the
envelope.
• When you are feeding A3, Legal or Ledger
size paper in the manual feed slot, the
machine holds the printed page after
printing so that the page does not fall.
Once printing is complete, pull out the
printed page and press OK.
36
f
If the data does not fit on one sheet, the
Touchscreen will prompt you to load
another sheet of paper. Place another
sheet of paper in the manual feed slot,
and then press OK on the Touchscreen.
NOTE
• Make sure printing has finished before you
close the manual feed slot cover.
• When paper is placed in the manual feed
slot, the machine will always print from the
manual feed slot.
• Paper inserted in the manual feed slot
while a test page, fax or report is being
printed will be ejected.
• During the machine's cleaning process,
paper you place in the manual feed slot
will be ejected. Wait until the machine
finishes its cleaning, and then place the
paper in the manual feed slot again.