Brother MFC-J4510DW Basic User's Manual page 35

e
Gently put the paper into the paper tray
print side down.
Check that the paper is flat in the tray.
Landscape orientation
IMPORTANT
Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
paper feed problems.
NOTE
• If you want to add paper before the tray is
empty, remove the paper from the tray
and combine it with the paper you are
adding. Always fan the stack of paper well
before loading it in the tray. If you add
paper without fanning the stack, the
machine may feed multiple pages.
• If you want to use A3, Ledger or Legal size
paper, see When using A3, Ledger or
Legal size paper on page 28.
f
Gently adjust the paper guides (1) to fit
the paper.
Make sure the paper guides touch the
sides of the paper.
2
g
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
Overfilling the paper tray may cause
paper jams.
Loading paper
1
1
27
2