Making Copies; How To Copy; Stop Copying; Copy Options - Brother MFC-J4410DW Basic User's Manual

8

Making copies

How to copy

The following steps show the basic copy
operation.
a
Do one of the following to load your
document:
 Place the document face down in the
ADF.
(See Using the ADF on page 34.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
on page 35.)
b
Press (Copy).
 The Touchscreen shows:
1
1 No. of Copies
You can enter the number of copies by
pressing - or + on the Touchscreen (as
shown above) or by using the dial pad.
c
If you want more than one copy, enter
the number (up to 99).
d
Press Mono Start or Colour Start.

Stop copying

To stop copying, press
58
8
8
.

Copy options

You can change the following copy settings.
Press Copy and then press Options. Press
s or t on the Touchpanel to scroll through
the copy settings. When the setting you want
is displayed, press it and choose your option.
When you have finished changing options,
press OK.
(Basic User's Guide)
For information about changing the following
copy settings, see page 59.

Paper Type

Paper Size
1

Tray Select
1
MFC-J4610DW only.
(Advanced User's Guide)
For information about changing the following
copy settings, see Advanced User's Guide:
Copy options.

Quality

Enlarge/Reduce

Page Layout

2in1(ID)

Stack/Sort

Density

2-sided Copy

Ink Save Mode

Thin Paper Copy

Book Copy

Remove Background

Set New Default

Factory Reset
NOTE
If you want to sort copies, use the ADF.
8
8