Using Remote Codes - Brother MFC-J4410DW Basic User's Manual

Chapter 6

Using remote codes

Remote Activation Code
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds and
then replace the handset. (See Fax Detect
on page 45.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Fax Start and
choose Receive.
Remote Deactivation Code
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
Ring (fast double-ring) after the initial ring
delay. If you pick up the call on an extension
telephone, you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Pickup.
Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1. The preset
Remote Deactivation Code is # 5 1. If you
want to, you can replace them with your own
codes.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display Fax.
c
Press Fax.
d
Press s or t to display
Setup Receive.
52
e
Press Setup Receive.
6
f
Press s or t to display
Remote Codes.
6
g
Press Remote Codes.
h
Press On.
i
Do one of the following.
 If you want to change the Remote
Activation Code (Act.Code), enter
the new code.
Press OK, go to step j.
 If you do not want to change the
Remote Activation Code, press OK,
go to step j.
6
j
Do one of the following.
If you want to change the Remote

Deactivation Code (Deact.Code),
enter the new code.
Press OK, go to step k.
 If you do not want to change the
Remote Deactivation Code, press
OK, go to step k.
k
Press .
NOTE
6
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.