Stop Faxing; Setting Scanner Glass Size For Faxing - Brother MFC-J4410DW Basic User's Manual

Chapter 4
d
Enter the fax number.
Using the dial pad
Using (Address)

Address Book
Using (History)

Outgoing

Incoming
e
Press Fax Start.
Faxing from the ADF
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass
 If you choose Mono in the
Colour Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Colour in the
Colour Setting, the
Touchscreen asks if you want to
send a colour fax. Press
Colour Fax to confirm. The
machine starts dialling and sending
the document.
f
When the Touchscreen asks you
Next Page?, do one of the following:
 To send a single page, press
No (Send).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
38

Stop faxing

To stop faxing, press
Setting scanner glass size for
faxing
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a
Load your document.
b
Press
4
c
Press Options.
d
Press s or t on the Touchpanel to
display Glass Scan Size.
4
e
Press Glass Scan Size.
f
Press Letter (or A4).
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User's Guide: Setting
your changes as a new default.)
• This setting is only available for sending
documents from the scanner glass.
.
(Fax).
4
4