Combining Quick-Dial Numbers; Tone Or Pulse - Brother MFC-9450CDN User Manual

Chapter 8
Combining quick-dial
numbers
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555 ' on
Speed-Dial #003 and '7000 ' on Speed-Dial
#002. You can use them both to dial
'555-7000 ' if you press the following keys:
Press Search/Speed Dial, 003. Press
Search/Speed Dial, 002 and Mono Start or
Colour Start.
Numbers can be added manually by entering
them on the dial pad:
Press Search/Speed Dial, 003, 7001 (on the
dial pad), and Mono Start or Colour Start.
This would dial '555-7001 '. You can also add
a pause by pressing the Redial/Pause key.

Tone or pulse

If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have a Touch Tone service, you
will not need this feature to send tone signals.
a
Lift the handset of the external
telephone, and press Tel/R.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.
56
8
8